Siglent SDM3045X multimeter MCP Server

Connect this server

This server runs on your own machine — install it with the package manager and the client starts it for you. Package name taken from the official registry entry.

claude mcp add mcp-server-siglent-sdm3045x -- uvx mcp-server-siglent-sdm3045x

{
  "mcpServers": {
    "mcp-server-siglent-sdm3045x": {
      "command": "uvx",
      "args": [
        "mcp-server-siglent-sdm3045x"
      ]
    }
  }
}

[mcp_servers.mcp-server-siglent-sdm3045x]
command = "uvx"
args = ["mcp-server-siglent-sdm3045x"]

{
  "mcpServers": {
    "mcp-server-siglent-sdm3045x": {
      "command": "uvx",
      "args": [
        "mcp-server-siglent-sdm3045x"
      ]
    }
  }
}

{
  "servers": {
    "mcp-server-siglent-sdm3045x": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "mcp-server-siglent-sdm3045x"
      ]
    }
  }
}

Optional settings from the registry entry, left out of the block above: SDM_RESOURCE (Instrument address: /dev/usbtmc0, an IP address or a VISA resource string. Auto-detected on USB and in the local network if not set), SDM_SERIAL (Serial number of the instrument to use when several are connected (auto-detection only)), SDM_ALLOW_SCPI (Set to 1 to enable the raw SCPI tool, which can change any instrument setting), SDM_VISA_BACKEND (PyVISA backend: @py (pyvisa-py) or @ivi for an installed NI/Keysight VISA).