MVisionPro Engineering Tools MCP Server

by mvisionpro Your server? Claim it

answering

MVisionPro Engineering Tools is answering right now. Last checked 1 min ago. It exposes 6 tools.

Read-only machine-vision calculations for optics, interfaces, line scan, sensors, and models.

Uptime history 12 hours of history

12 hours agonow

100.0%

Uptime 24h

45 of 45 checks

Tools

read from the server

674 ms

Response time

average over 24h

open, no key

Access

streamable-http

Nothing serious here today

Today is the operative word: we check MVisionPro Engineering Tools every 15 minutes and re-read its code on every release. Watch it and you find out the day that stops being true.

Connect this server

Endpoint below is the one we actually reach during checks — not the one copied from a README. Last verified 1 min ago.

Claude Code Claude Desktop Codex Cursor VS Code

run in your terminal

claude mcp add tools --transport http https://mvisionpro.com/tools/mcp

~/Library/Application Support/Claude/claude_desktop_config.json

{
  "mcpServers": {
    "tools": {
      "url": "https://mvisionpro.com/tools/mcp"
    }
  }
}

~/.codex/config.toml

[mcp_servers.tools]
url = "https://mvisionpro.com/tools/mcp"

.cursor/mcp.json

{
  "mcpServers": {
    "tools": {
      "url": "https://mvisionpro.com/tools/mcp"
    }
  }
}

.vscode/mcp.json

{
  "mcpServers": {
    "tools": {
      "url": "https://mvisionpro.com/tools/mcp"
    }
  }
}

Available tools 6

Read directly from the server with tools/list, grouped by what they act on. If a tool disappears, we record the date.

analog

analog

Compare one unambiguous competitor model with bounded Hikrobot candidates. Compare one unambiguous competitor model with a bounded set of public Hikrobot candidates.

interface

interface

Calculate stream bandwidth and evaluate interface options. Provide either camera or the complete manual stream set widthPx, heightPx, fps, bits, streamType and packed; do not combine the two modes. width and height are independent aliases for widthPx and heightPx, so mixed alias pairs are accepted, but do not send both aliases for one axis. The discovery alternatives describe complete sets; execution also rejects partial manual sets and every camera/manual mixture, for example camera with widthPx.

linescan

linescan

Calculate line width, line rate, exposure and confirmed camera modes. widthMm is required. Provide exactly one speed field (speedMmS or speedMMin) and exactly one calculation set (defectMm+nPx or accuracyMm+kPx); mode is inferred when omitted. samplingMode defaults to xy, or to width when longitudinalStepMm is present.

models

models

Search the bounded public catalog projection. Search the bounded public catalog projection by literal model, alias, SKU or slug.

optics

optics

Calculate camera geometry, object sampling, exposure and depth of field. Provide exactly one sensor source: camera, sensor, or both manual sensor axes. Camera cannot be combined with manual passport fields. fovMm and wdMm are always required.

sensors

sensors

Get a sensor aggregation by exactly one camera model or sensor part. Provide exactly one lookup key: a catalog camera model or a sensor part number.

Endpoints

URL	Transport	State	Latency	Checked
https://mvisionpro.com/tools/mcp	streamable-http	answering	716 ms	1 min ago

Alternatives to MVisionPro Engineering Tools

same job, measured the same way

EngScript Engineering MCP

by engscript

Engineering calculation MCP server for oil and gas engineering applications.

58 tools answering

Metamodel

by joegra2003

AI-callable calculators and engineering models with real formulas. No hallucinated math.

27 installs/wk 4 tools answering

Engineerpro Library

by aiengineerprofessional

Read-only EngineerPro engineering library (118 book profiles) and software-engineering tools.

5 tools answering

Ansys MCP Server

by vorobjewsen30-max

MCP server for Ansys engineering simulations — CFD, FEA, meshing, and post-processing. 24 tools.

59 installs/wk local only

GCP Platform Engineer

by debilla

Read-only GCP tools for debugging incidents and finding cost savings

562 installs/wk local only

Engineering

by novtriq

27 engineering compliance and calculation tools for the built environment (UK, EU, UAE).

27 tools answering

Commonlands Optics: M12 Lens and C-Mount Lens Finder + Field-of-View Calculator

by commonlands

M12 lens and C-mount lens finder with image-sensor matching and field-of-view calculator.

21 tools answering

KrystalView Analytics

by krystalview

Read-only MCP access to sessions, funnels, campaigns, errors, live visitors, and anomalies.

13 tools answering

MVisionPro Engineering Tools — questions

Answers built from our own checks of this server.

What can MVisionPro Engineering Tools do?

It exposes 6 tools, read directly from the server on our last check. Among them: analog, interface, linescan, models, optics, sensors. The full list with descriptions is on this page — we take it from the server itself via tools/list, not from a README. How MCP servers expose tools in the first place →

Is MVisionPro Engineering Tools working right now?

We send a real MCP handshake every 15 minutes. Over the last 24 hours 45 of 45 checks got a reply (100.0%), average response time 674 ms. The bar chart above shows every period we have measured.

How do I connect MVisionPro Engineering Tools?

Copy the ready config from this page — we generate it for Claude Code, Claude Desktop, Codex, Cursor and VS Code, each with the file path that client actually reads. It is a remote server, so there is nothing to install — the client connects to the address.

Does MVisionPro Engineering Tools need an API key?

No. MVisionPro Engineering Tools completed a full MCP handshake with us as an anonymous client and listed its tools without asking for anything. All 6 of them are readable on this page. This is what we observed, not what the docs claim.

How fast is MVisionPro Engineering Tools?

It answers our handshake in 674 ms on average, which is faster than 19% of all working MCP servers we measure. That is on the slow side — worth knowing if the tool sits inside an interactive loop. The comparison comes from our own checks across the whole registry, every 15 minutes.