Matlab Simulate Wireless Network Agent Skill

Wireless Network Simulation Fundamentals

Foundation patterns for system-level wireless simulation. Technology-specific skills build on these for node creation, connection configuration, and KPI extraction.

When to Use

• Creating system-level wireless network simulations with wirelessNetworkSimulator
• Adding traffic sources (networkTrafficOnOff, networkTrafficFTP, networkTrafficVoIP, networkTrafficVideoConference)
• Configuring node mobility (random waypoint, custom models)
• Logging events or IQ samples with wirelessNetworkEventTracer or IQ logger
• Visualizing traffic with wirelessTrafficViewer and network layout with wirelessNetworkViewer
• Scheduling actions during simulation with scheduleAction
• Running parametric sweeps over simulation parameters
• Writing PCAP files with pcapWriter or technology-specific PCAP writers
• Creating custom nodes by subclassing wnet.Node
• Registering event callbacks on wireless nodes

When Not to Use

• PHY-layer or link-level simulations without wirelessNetworkSimulator
• Bluetooth-specific topology setup (use matlab-simulate-bluetooth-network instead)
• WLAN-specific or 5G NR-specific configuration (use the respective technology skills)
• Signal processing or waveform generation tasks

Node Creation

All nodes in the simulator inherit from wnet.Node. Choose the correct node type:

| Technology | Node Constructor | Notes |

|-----------|-----------------|-------|

| Bluetooth LE | bluetoothLENode("central") / bluetoothLENode("peripheral") | Use the matlab-simulate-bluetooth-network skill |

| Classic Bluetooth BR/EDR | bluetoothNode("central") / bluetoothNode("peripheral") | Use the matlab-simulate-bluetooth-network skill |

| WLAN | wlanNode(...) | Requires WLAN Toolbox |

| 5G NR | nrGNB(...) / nrUE(...) | Requires 5G Toolbox |

| Any other / custom | Subclass wnet.Node | See references/custom-node.md |

wnet.Node is abstract — never instantiate it directly. If the scenario does not use a specific technology listed above, you MUST create a custom node class that inherits from wnet.Node. Technology nodes (bluetoothLENode, bluetoothNode, wlanNode, nrGNB, nrUE) implement the wnet.Node interface internally — properties like Position, ID, Name, Velocity, addMobility, registerEventCallback, and statistics work on all node types.

Workflow

Every system-level simulation follows this order:

• wirelessNetworkSimulator.init (MUST be first)
• Create nodes — use technology-specific constructors when available, otherwise subclass wnet.Node (see references/custom-node.md)
• Configure connections (technology-specific)
• addTrafficSource (technology nodes only, vectorized for multiple destinations; custom nodes generate traffic in run())
• addMobility (optional)
• Instrumentation — event tracer, IQ logger, traffic viewer (optional)
• addNodes(sim, nodes) (batch, one call per technology type)
• run(sim, duration) or multi-step with IsLastStep=false
• statistics() or technology-specific KPI functions

Simulator Initialization

wirelessNetworkSimulator.init MUST be the first executable statement. The simulator is a singleton — calling .init reinitializes it. Never use a constructor (wirelessNetworkSimulator() — doesn't exist).

clearvars;
rng("default");
sim = wirelessNetworkSimulator.init;

Custom Node (wnet.Node Subclass)

Override 5 methods: run, pullTransmittedPacket, pushReceivedPacket, isPacketRelevant, statistics. Always use pkt = wirelessPacket to create packet structures — this initializes all required fields including Metadata.Channel (needed by the channel model). Use wnet.TechnologyType.Custom1–Custom9 for the TechnologyType field. See references/custom-node.md for the full method table, packet fields, receive buffering pattern, and example.

Access specifiers: All overridden methods must match the parent wnet.Node access specifier. In R2026a, run, pullTransmittedPacket, pushReceivedPacket, isPacketRelevant, and statistics are all public in wnet.Node. Place them in a single methods block (default public) alongside the constructor. Using a different access specifier (e.g., protected) causes a MATLAB error.

Critical: run() must guard transmissions with NextTxTime and round(..., 9) — the simulator re-invokes run() at the same currentTime after delivering received packets. Without the guard, 2+ nodes cause an infinite loop.

Troubleshooting: If encountering errors with custom node creation, refer to the built-in example for a working implementation: openExample("wnet/CreateAndSimulateWirelessNetworkOfCustomNodesExample"). Inspect the custom node class code for correct method signatures and access specifiers.

Vectorized Node Creation

Any supported node type can create multiple nodes with Position=[N×3] and Name=[1×N string]:

nodes = NodeConstructor(Position=[5 0 0; 0 5 0; -5 0 0], Name=["N1", "N2", "N3"]);

Random Placement with nodePositionRandom

region = nsidedpoly(6, Center=[0 0], SideLength=50);
positions = nodePositionRandom(region, NumNodes=10, ZCoordinate=0);
nodes = NodeConstructor(Position=positions, Name="N"+(1:10));

Batch addNodes

One addNodes per technology type. Never call per-node.

addNodes(sim, [sourceNode; destNodes(:)]);    % same type
addNodes(sim, nodesTypeA);                     % mixed sim: separate calls
addNodes(sim, nodesTypeB);

Traffic Sources

addTrafficSource is available only on technology nodes (BLE, BR/EDR, WLAN, NR) — not on custom wnet.Node subclasses.

networkTrafficOnOff DataRate is in Kbps (kilobits/s). The generate() method returns inter-packet time in ms.

traffic = networkTrafficOnOff(DataRate=100, PacketSize=50, OnTime=Inf);

Common mistake: DataRate=100000 for 100 Kbps — this is 100 Mbps (1000× too high). Runs without error but produces unrealistic traffic. See references/traffic-models.md for all traffic source types and their parameters.

Reuse a single traffic object for identical flows — DestinationNode accepts vectors:

addTrafficSource(central, traffic, DestinationNode=[p1; p2; p3]);

Vectorized Statistics

For technology nodes (BLE, BR/EDR, WLAN, NR), vectorized statistics returns a 1×N struct array:

allStats = statistics(nodes);  % 1×N struct array (technology nodes)
rxBytes = [allStats.App];      % Concatenate sub-structs

For custom wnet.Node subclasses, vectorized behavior depends on the statistics() method implementation — call per-node if the return struct varies.

Mobility

addMobility on the node vector directly (not per-node). Bounds = [x_center, y_center, width, height] (NOT [xmin, ymin, xmax, ymax]).

addMobility(nodes, MobilityModel="random-waypoint", SpeedRange=[1.0 1.5], Bounds=[10 0 12 4]);

Models: "random-waypoint", "random-walk", "constant-velocity". Every node must be within ±width/2 of x_center and ±height/2 of y_center. See references/mobility-models.md for detailed examples.

Multi-Step Simulation

Each run specifies additional duration (relative), not absolute end time:

run(sim, 0.3, IsLastStep=false);   % Run 0.3s, keep state
stats_mid = statistics(node);
run(sim, 0.2);                      % Additional 0.2s (0.5s total)

Scheduled Actions

scheduleAction(sim, @myCallback, userData, 0.3);         % one-shot at t=0.3s
scheduleAction(sim, @myCallback, userData, 0.1, 0.05);   % periodic: start 0.1s, repeat 0.05s

Callback signature — two arguments (actionID, userData):

function myCallback(actionID, userData)
    stats = statistics(userData.node);
end

Valid mid-sim operations: statistics(node), change node.Position, technology-specific mid-sim methods. Most RF properties are locked after run() starts.

Custom Channel Model

addChannelModel(sim, @myChannelModel);

function txData = myChannelModel(rxInfo, txData)
    dist = norm(rxInfo.Position - txData.TransmitterPosition);
    fspl = 20*log10(dist) + 20*log10(txData.CenterFrequency) - 147.55;
    txData.Metadata.Channel.PathDelays = 0;
    txData.Metadata.Channel.PathGains = -fspl;
end

Signature: function txData = fcn(rxInfo, txData) — two inputs, not one.

rxInfo fields: ID, Position, Velocity, NumReceiveAntennas.

Key txData fields: Power, CenterFrequency, StartTime, TransmitterPosition, TransmitterVelocity, Bandwidth, Metadata.Channel (PathGains, PathDelays, PathFilters, SampleTimes).

Default uses FSPL. Use addChannelModel for distance-dependent fading, multipath, or environment-specific propagation.

Parametric Sweeps

wirelessNetworkSimulator.init MUST be at the top of every loop iteration (singleton retains state). See references/parametric-sweep-pattern.md for multi-dim and parfor patterns.

Instrumentation (R2026a)

All tools must be created before run(). See references/event-tracing-iq-logging.md for full details.

eventTracer = wirelessNetworkEventTracer(FileName="events.mat");
addNodes(eventTracer, nodes, EventName=["TransmissionStarted", "ReceptionEnded"]);

iqLogger = wirelessIQLogger(receiverNodes, FileName="iq_samples.mat");

viewer = wirelessTrafficViewer;
addNodes(viewer, nodes);

• Event Tracer: Works with all node types. addNodes calls registerEventCallback on each node for each specified EventName — for custom wnet.Node subclasses, your node must override registerEventCallback to support the event names (see references/custom-node.md). Errors if MAT file already exists. Read with read(eventTracer, EventName=..., NodeName=..., TimeRange=...).
• IQ Logger: Nodes fixed at construction (no addNodes). ~4–5 MB per node per 0.1s at 80 MHz. Technology nodes only — custom wnet.Node subclasses are not supported.
• Network Viewer: wirelessNetworkViewer(NetworkSimulator=sim) + addNodes(viewer, nodes, Type="Transmitter"/"Receiver") + showBoundary(viewer, BoundaryShape="circle", Bounds=radius, Position=[x y z]). Shapes: "circle", "rectangle", "hexagon".
• Traffic Viewer: Real-time state transitions and channel occupancy. Technology nodes only — custom wnet.Node subclasses are not supported.

PCAP Capture

Generic pcapWriter for any technology; technology-specific writers (blePCAPWriter, wlanPCAPWriter, nrPCAPWriter) auto-capture from nodes via Node= property.

% Generic (manual write)
pcapObj = pcapWriter(FileName="my_capture");
writeGlobalHeader(pcapObj, linkType);
write(pcapObj, packetBytes, round(simTime * 1e6));  % timestamp in microseconds (integer)

% Technology-specific (auto-capture, no write calls needed)
blePcap = blePCAPWriter(FileName="ble_capture", Node=[central; peripheral]);

Common link types: LINKTYPE_USER0 (147), LINKTYPE_IEEE802_11 (105). Reading: readAll(pcapReader("file.pcap")).

For Bluetooth-specific PCAP capture, see references/bluetooth-capture.md.

Event Callbacks (registerEventCallback)

Register a callback on a node to be invoked when a specific event occurs. Callback receives a single argument (event data struct).

registerEventCallback(node, "ReceptionEnded", @myCallback);

function myCallback(eventData)
    disp(eventData.Timestamp);          % sim time (seconds)
    disp(eventData.EventData.SINR);     % technology-specific nested payload
end

Technology nodes (BLE, BR/EDR, WLAN, NR): Call registerEventCallback to register — the node's internal implementation automatically invokes the callback at the correct moments during simulation.

Custom wnet.Node subclasses: The base wnet.Node.registerEventCallback is a no-op stub — it accepts arguments but does not store or fire callbacks. You MUST override registerEventCallback in your subclass to store callbacks, then explicitly invoke them at the appropriate points (e.g., after transmitting in run(), after receiving in pushReceivedPacket()). See references/custom-node.md for the full implementation pattern.

Top-level fields: EventName, NodeName, NodeID, Timestamp, TechnologyType, EventData (nested struct).

For Bluetooth-specific event data fields, see references/bluetooth-capture.md.

Common Mistakes

| Mistake | Correct |

|---------|---------|

| node = wnet.Node(...) or creating a bare wnet.Node | wnet.Node is abstract — subclass it: classdef MyNode < wnet.Node |

| Using bluetoothLENode/bluetoothNode for non-Bluetooth scenarios | Use a custom wnet.Node subclass for generic/custom wireless nodes |

| TechnologyType = "custom" (string) | Use wnet.TechnologyType.Custom1 (numeric constant 101–109) |

| Bounds=[0 0 20 20] as [xmin,ymin,xmax,ymax] | Bounds=[x_center, y_center, width, height] |

| function myFcn(userData) for scheduleAction | function myFcn(actionID, userData) — 2 args |

| function txData = fcn(txData) for addChannelModel | function txData = fcn(rxInfo, txData) — 2 inputs |

| addMobility(sim, nodes, ...) | addMobility(nodes, ...) — node method, not sim |

| DataRate=100000 for 100 Kbps | DataRate=100 — unit is Kbps |

| pcapWriter() without writeGlobalHeader | Must call writeGlobalHeader(pcapObj, linkType) before any write() |

| Building file-write callbacks for logging | Use wirelessNetworkEventTracer instead |

| Calling registerEventCallback on a custom node without overriding it | Base wnet.Node.registerEventCallback is a no-op — override it to store callbacks, fire them manually from run()/pushReceivedPacket() |

| addTrafficSource(customNode, traffic, ...) on a custom wnet.Node | addTrafficSource is technology-node-only |

| Ignoring received packets in pushReceivedPacket | Use wnet.internal.interferenceBuffer with addPacket to store received packets |

<!-- Copyright 2026 The MathWorks, Inc. -->