Dt Alerting

dt-alerting

Configure and understand the full alerting lifecycle in Dynatrace — from anomaly

detector setup through Grail event storage, problem grouping, and workflow

notification delivery.

The Alerting Lifecycle

┌─────────────────────────────────────────────────────────────────────┐
│  Alert Sources — five categories, each fires a DAVIS_EVENT          │
│  ─────────────────────────────────────────────────────────────────  │
│  1. DQL-based  · Grail-scheduled server-side detector               │
│  2. Edge       · OneAgent on monitored host or process              │
│  3. Pipeline   · OpenPipeline ingest-stream filter matcher          │
│  4. Synthetic  · Worldwide synthetic checker node                   │
│  5. External   · Events API, Workflow, or OneAgent local ingest     │
└──────────────────────────────┬──────────────────────────────────────┘
                               │ DAVIS_EVENT created per trigger per entity
                               ▼
             ┌─────────────────────────────────────┐
             │  Event stored in Grail              │  Persisted and queryable via DQL.
             └──────────────────┬──────────────────┘  One event per trigger per entity.
                                │ correlated by root-cause and impact graph
                                ▼
             ┌─────────────────────────────────────┐
             │  Problem (Denoising)                │  Events sharing the same root-cause
             └──────────────────┬──────────────────┘  and impact graph → one Problem.
                                │ problem event triggers workflow
                                ▼
             ┌─────────────────────────────────────┐
             │  Workflow Notification              │  Filters problems and routes to
             └─────────────────────────────────────┘  email, Slack, ServiceNow, webhook.

When to Use This Skill

• Detector setup — "How do I create an anomaly detector?", "What kind of

detector should I use?", "What is the difference between adaptive and seasonal?"

• Alert event history — "Query all alert events for this service", "Show me

which metrics triggered alerts last week"

• Problem denoising — "Why did these two alerts merge into one problem?",

"How does Davis group alerts?"

• Notification setup — "How do I send a Slack message when a problem opens?",

"Set up a ServiceNow ticket on critical problems"

• Best practices — "How do I avoid alert storms?", "Which sensitivity setting

should I use?"

• Over-alerting analysis — "Why am I getting too many alerts?", "How do I

reduce alert fatigue?", "Which detector is firing the most?", "How do I tune

sensitivity or thresholds to avoid noise?"

• Notification routing — "How do I route alerts to the right team?", "Set up

scalable problem filters in workflows", "Send Slack notifications only to the

team responsible for the affected service"

Agent Instructions

First step for any alerting setup request — Before recommending a specific

detector or model, load references/anomaly-detectors.md and use its category

and model decision guide to identify which detector category (DQL-based, Edge,

Pipeline, Synthetic, External) and which model (Static, Adaptive, Seasonal)

best fits the user's use-case. Only proceed with configuration guidance once

the right detector type has been established.

Consolidate, don't multiply — When a user asks to alert on multiple

entities of the same kind (e.g. "alert on services A, B, and C"), always

recommend a single combined detector rather than one detector per entity.

Use by: { <dimension> } in the DQL timeseries call to split results per

entity, and a single filter: clause to scope to the relevant entities.

Pair the combined detector with a single dt.alert_group tag shared

across all alert conditions and the corresponding workflow notification filter.

This keeps the number of detector configs small, ensures consistent routing,

and makes the workflow notification channel reusable for future entities added

to the same group.

Example for three services — one detector, one workflow:

timeseries avg(dt.service.request.response_time),
  by: { dt.smartscape.service },
  filter: { in(dt.smartscape.service, {toSmartscapeId("SERVICE-0000000000000001"), toSmartscapeId("SERVICE-0000000000000002"), toSmartscapeId("SERVICE-0000000000000003")}) }

Set dt.alert_group: "checkout-team" in the detector's event properties, then

filter the notification workflow on matchesPhrase(dt.alert_group, "checkout-team").

If a new service must be covered, add it to the single filter: list — no new

detector or workflow rule needed.

Intent Mapping

| User Request | Action | Reference |

|---|---|---|

| "how to alert on ...", "create an alert on ...", "create anomaly detector", "set up alerting", "configure alert rule" | Explain detector categories and variants, guide through model selection | anomaly-detectors.md |

| "what kinds of anomaly detectors", "edge alert", "pipeline alert", "synthetic alert", "OneAgent alert" | Explain the five alert source categories and their trade-offs | anomaly-detectors.md |

| "static vs adaptive", "which detector model", "seasonal detector" | Compare models, apply decision guide | anomaly-detectors.md |

| "query alert history", "which alerts fired", "Davis events in Grail" | Query dt.davis.events in Grail via fetch dt.davis.events | davis-events.md |

| "why did alerts merge", "problem grouping", "denoising" | Do NOT explain merging rules here — load dt-obs-problems and refer to problem-merging.md for the full merge logic | dt-obs-problems/references/problem-merging.md |

| "send Slack notification", "email on problem", "ServiceNow ticket", "notify on alert" | Explain problem-triggered workflow setup | workflow-notifications.md |

| "alert storm", "too many notifications", "reduce noise" | Filtering strategy, denoising, sensitivity tuning | workflow-notifications.md + anomaly-detectors.md |

> Analyzing existing problems — If the user wants to query or investigate

> active/closed problems (root cause, impact, trending), load dt-obs-problems

> instead. This skill covers *configuration and flow*, not problem query analytics.

> Detector health monitoring — If the user asks whether detectors are

> running or failing, load dt-platform (ANALYZER_EXECUTION_EVENT,

> ANOMALY_DETECTOR_STATUS_EVENT). This skill covers *setup*, not operational health.

Prerequisites

• Access to a Dynatrace environment with Settings v2 write permissions for

detector configuration

• For querying alert history: DQL permissions on dt.davis.events
• Load dt-dql-essentials before writing DQL queries

Knowledge Base Structure

| # | Reference | Content |

|---|-----------|---------|

| 1 | anomaly-detectors.md | Detector types, model selection, configuration, best practices |

| 2 | davis-events.md | Davis event storage in Grail, key fields, DQL query patterns |

| 3 | workflow-notifications.md | Problem-triggered workflows, filtering, notification channels |

Key Concepts

Alert Source Categories

Five fundamental categories of anomaly detectors, distinguished by where detection

runs and how the alert event reaches Dynatrace:

| # | Category | Detection runs on | Latency | Alert logic owner |

|---|----------|-------------------|---------|-------------------|

| 1 | DQL-based | Grail (server-side, scheduled) | Minutes | Dynatrace |

| 2 | Edge | OneAgent on the monitored host/process | Seconds | Dynatrace (OneAgent) |

| 3 | Pipeline | OpenPipeline ingest path (in-stream) | Near-zero | Dynatrace (pipeline rule) |

| 4 | Synthetic | Synthetic checker node (worldwide) | Seconds | Dynatrace (synthetic node) |

| 5 | External | Customer / external tool | Caller-defined | Customer |

See references/anomaly-detectors.md for the full breakdown of each category,

including trade-offs and configuration entry points.

Detector Models at a Glance

| Model | Threshold | Best for |

|-------|-----------|----------|

| Static | Fixed value you define | Known hard limits (e.g. error rate > 5%) |

| Adaptive baseline | Learned from recent history | Metrics with no fixed limit but clear normal behavior |

| Seasonal baseline | Learned with time-of-day / day-of-week awareness | Traffic, request rate, or any metric with recurring patterns |

Davis Events vs. Problems

| Concept | Table | Scope |

|---------|-------|-------|

| Davis event | fetch dt.davis.events | One record per detector trigger per entity |

| Problem | fetch dt.davis.problems | One record per correlated group of events sharing root-cause and impact |

A single problem typically contains multiple events. Querying problems gives

the operational view; querying events gives the raw alert history.

Problem Denoising

For questions about why alerts merged into a problem or how Davis groups

events, load dt-obs-problems — the merge logic and rules are documented in

dt-obs-problems/references/problem-merging.md. This skill covers alert

*configuration and flow* only.

Quick Start

Check What Alerts Fired in the Last 24 Hours

fetch dt.davis.events, from: -24h
| filter event.status == "ACTIVE"
| summarize alert_count = count(), by: {event.name, event.category, dt.smartscape_source.id}
| sort alert_count desc
| limit 20

Check Alert Volume by Category

fetch dt.davis.events, from: -24h
| summarize count = count(), by: {event.category, event.status}
| sort count desc

See All Active Problems (→ load dt-obs-problems for full query patterns)

fetch dt.davis.problems, from: -24h
| filter not(dt.davis.is_duplicate) and event.status == "ACTIVE"
| fields event.start, display_id, event.name, event.category
| sort event.start desc
| limit 20

Best Practices

• Match the model to the metric's behavior — Use static for hard SLO

boundaries, adaptive for metrics without a natural fixed limit, seasonal for

anything that follows business hours or weekly patterns.

• Scope detectors narrowly — An entity selector that covers only relevant

entities reduces noise and makes problems more actionable.

• Tune sensitivity before going to production — Start with LOW sensitivity

and move to MEDIUM or HIGH only after observing false-positive rates.

• Let Davis denoise before notifying — Trigger workflow notifications on

*problems*, not individual alert events. A problem groups correlated alerts

so you notify once per incident, not once per metric.

• Filter notifications by severity level — Route event.severity <= 2 problems to

on-call channels immediately; route event.severity >= 3 problems to lower-

urgency channels. Either set severity in the detector config or assign in a pipeline rule or workflow.

• Use dt.alert_group event property for routing — Assign dt.alert_group to route alerts to the right team. Either set a static value in the detector config, use dynamic assignment through DQL query result mapping or assign in a pipeline rule.
• Combine same-condition alerts into one detector and one workflow — When

alerting on multiple entities with the same metric and threshold, merge them

into a single DQL-based detector using by: { <dimension> } and a combined

filter: clause. Assign the same dt.alert_group value to every condition

in that detector and point the workflow notification channel at that single

group. One detector + one workflow per logical alert group scales better than

N detectors + N notification rules, and adding a new entity is a one-line

filter change rather than a full detector/workflow addition.

Related Skills

• dt-obs-problems — Querying, analyzing, and trending detected problems
• dt-obs-predictive-analytics — Ad-hoc anomaly and novelty detection using

MCP analyzer tools (not persistent alert configs)

• dt-platform — Operational health of anomaly detectors (execution events,

failure rates)

• dt-platform-costs — Query costs generated by anomaly detector DQL
• dt-sdlc-quality-gates — Site Reliability Guardian for deployment gate alerting
• dt-dql-essentials — DQL syntax for writing detector queries and alert history

queries