9 skills published by arsallls across 1 repository. Together they weigh 20 183 tokens — that is what loading all of them at once would cost you in context. 3 of them have been repackaged into other people's repositories.
9 skills 20 183 tokens total 3 copies elsewhere
Pi-hole installation, blocklist management, DNS-over-HTTPS setup, DHCP integration, local DNS records, and troubleshooting broken DNS resolution on a home network.
Segmenting home networks into VLANs for IoT, guest, trusted, and server traffic using UniFi, pfSense/OPNsense, and MikroTik — including switch trunk config, firewall rules, and wireless SSID mapping.
WireGuard VPN server setup, peer configuration, key generation, split tunneling vs full tunnel routing, and remote access to a home network from mobile and laptop clients.
Cisco IOS and IOS-XE configuration syntax, show commands, privilege levels, config mode navigation, wildcard masks, and the most common operational gotchas.
Home network architecture from scratch — gateway placement, switch and AP selection, IP addressing scheme design, DHCP scoping, and common setup mistakes for homelab beginners.
Multi-vendor network device SSH automation using Python Netmiko — connecting, sending commands, parsing output, handling enable mode, error handling, and batch operations across device lists.
BGP neighbor state analysis, stuck session troubleshooting, AS path inspection, route filtering, and peering issue diagnosis on Cisco IOS/IOS-XE and multi-vendor devices.
Pre-deployment validation of Cisco IOS/IOS-XE configuration — catching missing saves, mismatched ACLs, overlapping subnets, duplicate IPs, missing route-maps, and dangerous commands before they cause outages.
Diagnosing network interface errors including CRC errors, input/output drops, runts, giants, duplex mismatches, flapping, and speed negotiation failures on Cisco IOS/IOS-XE devices.