mcpbeat

Cell Free Expression

adaptyvbio/cell-free-expression

> (1) Planning CFPS experiments, (2) Troubleshooting low yield or aggregation, (3) Optimizing DNA template design for CFPS, (4) Expressing difficult proteins (disulfide-rich, toxic, membrane).

3k tokens
context cost
the whole folder, loaded on every use
1
files
instructions only
1
copies elsewhere
how many repositories repackaged it
151
stars on the repo
on the repository, not the skill itself

Install

one command, takes just this skill from the repository
npx skills add https://github.com/adaptyvbio/protein-design-skills --skill cell-free-expression

The instruction itself

39 sections, as written by the author

Cell-Free Protein Synthesis (CFPS)

System Selection Guide

| System | Best For | Yield | PTMs | Disulfides | Cost |

|--------|----------|-------|------|------------|------|

| E. coli extract | Rapid prototyping, prokaryotic proteins | High (100-400 μg/mL) | None | Poor (reducing) | Low |

| E. coli PURE | Defined conditions, unnatural AAs | Medium (50-150 μg/mL) | None | Controllable | High |

| Wheat germ | Eukaryotic proteins, membrane proteins | High (100-500 μg/mL) | Limited | Moderate | Medium |

| Rabbit reticulocyte | Mammalian proteins, post-translational studies | Low (10-50 μg/mL) | Some | Poor | High |

| Insect (Sf21) | Glycoproteins, complex folds | Medium (50-100 μg/mL) | Glycosylation | Good | High |

| HeLa/CHO | Native mammalian proteins | Low (10-50 μg/mL) | Full mammalian | Good | Very High |


CFPS Troubleshooting Matrix

| Problem | Likely Causes | Design Fix | Reagent Fix |

|---------|---------------|------------|-------------|

| No expression | Rare codons at N-terminus, poor RBS | Codon optimize first 30 codons | Use BL21-CodonPlus extract |

| Low yield | Strong mRNA secondary structure, template issues | Optimize 5' UTR (ΔG > -5 kcal/mol) | Increase Mg²⁺ (10-18 mM), ATP |

| Aggregation | Hydrophobic protein, fast translation | Add solubility tags (MBP, SUMO) | Add 0.1% Tween-20, chaperones |

| Inactive protein | Misfolding, missing cofactors | Slow translation (use rare codons!) | Add GroEL/ES, DnaK/J |

| Truncation | Rare codon clusters, mRNA instability | Remove AGG/AGA/CUA clusters | Supplement rare tRNAs |

| Degradation | Proteolysis | N-terminal Met-Ala | Add protease inhibitors |


Codon Optimization for CFPS

Codons to Avoid in E. coli CFPS

| Codon | Amino Acid | Issue | tRNA Abundance |

|-------|------------|-------|----------------|

| AGG | Arg | Very rare, stalling | 0.2% |

| AGA | Arg | Very rare, stalling | 0.4% |

| CUA | Leu | Low abundance | 0.4% |

| AUA | Ile | Rare | 0.5% |

| CGA | Arg | Inefficient decoding | 0.6% |

| CCC | Pro | Can cause pausing | 0.5% |

| GGA | Gly | Moderate | 1.1% |

Design Rules

  • First 30 codons: Most critical - use only high-frequency codons
  • Rare codon clusters: Avoid 2+ rare codons within 10 nt
  • Rare codon content: Keep overall <5% of coding sequence
  • GC content: Target 40-60% for balanced expression
  • Avoid runs: No >6 consecutive G or C residues (secondary structure)
  • Strategic slow codons: Place rare codons between domains (aids folding!)

When to Use Rare Codons

  • Domain boundaries (allow cotranslational folding)
  • Before complex structural elements
  • When protein is prone to misfolding

mRNA Template Design

5' UTR Optimization

| Element | Optimal Design | Impact |

|---------|----------------|--------|

| RBS (SD sequence) | AGGAGG, 7-9 nt from start | Ribosome binding |

| Spacing | 7 nt between SD and AUG | Translation initiation |

| Secondary structure | ΔG > -5 kcal/mol | Accessibility |

| Upstream AUG | Avoid (causes false starts) | Reduces truncations |

Secondary Structure Targets

| Region | Ideal ΔG | Impact |

|--------|----------|--------|

| -30 to +30 around AUG | > -5 kcal/mol | Translation initiation |

| Full 5' UTR | > -10 kcal/mol | Ribosome loading |

| RBS accessibility | Unpaired | Critical |

Template Format

| Format | Advantages | Disadvantages |

|--------|------------|---------------|

| Plasmid | Stable, high yield | Requires cloning |

| Linear PCR | Fast, no cloning | May need stabilization |

| mRNA | Direct translation | Unstable, expensive |


Disulfide Bond Formation

System Capabilities

| System | Native Disulfide Support | Additives Needed |

|--------|--------------------------|------------------|

| Standard E. coli extract | Poor (DTT present) | IAM, PDI, GSSG/GSH |

| Oxidizing E. coli extract | Good | Pre-oxidized glutathione |

| Wheat germ | Moderate | Lower DTT, add PDI |

| PURE system | Minimal | Full oxidative system |

| Insect/Mammalian | Good | Microsome membranes |

Oxidative Folding Protocol (E. coli extract)

1. Deplete DTT from extract (dialysis or treatment with IAM 5 mM)
2. Add oxidized/reduced glutathione: 4 mM GSSG, 1 mM GSH (4:1 ratio)
3. Add 10 μM PDI (protein disulfide isomerase)
4. Optional: Add 5 μM DsbC (disulfide isomerase)
5. Express at 25°C (not 37°C) for better folding
6. Incubation time: 4-6 hours

Disulfide-Rich Protein Tips

  • Start with wheat germ or oxidizing extract
  • Use PURE system for precise control
  • Consider co-expression of PDI/DsbC
  • Verify by non-reducing SDS-PAGE

Expression Prediction from Sequence

| Feature | Good | Marginal | Bad |

|---------|------|----------|-----|

| Rare codon content | <3% | 3-8% | >10% |

| First 30 codons rare | 0 | 1-2 | >2 |

| GC content | 45-55% | 35-45% or 55-65% | <30% or >70% |

| 5' UTR ΔG | > -3 kcal/mol | -3 to -8 | < -10 kcal/mol |

| Hydrophobic stretches | <5 consecutive | 5-7 | >8 consecutive |

| N-terminal residue | Met-Ala, Met-Ser, Met-Gly | Met-Val, Met-Thr | Met-Arg, Met-Lys |

| Cysteine pairs | Paired (even number) | Mixed | Odd number (free thiols) |


Solubility Enhancement Strategies

Fusion Tags (ranked by effectiveness)

| Tag | Size | Solubility Enhancement | Cleavage | Notes |

|-----|------|------------------------|----------|-------|

| MBP | 40 kDa | Excellent | TEV, Factor Xa | Best overall |

| SUMO | 11 kDa | Very Good | SUMO protease | Native N-terminus after cleavage |

| NusA | 55 kDa | Excellent | - | Large size |

| Trx | 12 kDa | Good | Enterokinase | For disulfide proteins |

| GST | 26 kDa | Moderate | - | Dimeric |

| His₆ | 1 kDa | Minimal | - | Mainly for purification |

Buffer Additives for Solubility

| Additive | Concentration | Mechanism |

|----------|---------------|-----------|

| Trehalose | 50-100 mM | Chemical chaperone |

| Glycerol | 5-10% | Reduces hydrophobic aggregation |

| L-Arginine | 50-100 mM | Suppresses aggregation |

| Tween-20 | 0.05-0.1% | Prevents surface adsorption |

| Proline | 50 mM | Osmolyte stabilization |

Chaperone Supplementation

| Chaperone System | Target Problem | Concentration |

|------------------|----------------|---------------|

| GroEL/GroES | General folding | 1-2 μM |

| DnaK/DnaJ/GrpE | Aggregation-prone | 1 μM each |

| Trigger Factor | Nascent chain | 1-2 μM |

| ClpB | Aggregate resolubilization | 0.5 μM |


Temperature Optimization

| Temperature | Use Case | Trade-offs |

|-------------|----------|------------|

| 37°C | Fast expression, stable proteins | Higher aggregation risk |

| 30°C | Balanced (default) | Good compromise |

| 25°C | Disulfide proteins, complex folds | Slower, better folding |

| 18-20°C | Aggregation-prone proteins | Much slower, best folding |

| 16°C | Cold-shock proteins | Very slow, specialized |


E. coli Extract Preparation (Key Variables)

| Variable | Impact | Optimal Range |

|----------|--------|---------------|

| Cell density at harvest | Ribosome content | OD₆₀₀ 2.5-3.5 |

| Lysis method | Extract activity | Sonication, bead beating |

| Run-off reaction | Removes endogenous mRNA | 20-80 min at 37°C |

| Mg²⁺ concentration | Translation fidelity | 10-18 mM |

| K⁺ concentration | Translation rate | 150-200 mM |

| Energy system | Sustained synthesis | ATP/GTP, creatine phosphate |


PURE System Specifics

Advantages

  • Defined composition (no proteases/nucleases)
  • Linear DNA templates work well
  • Unnatural amino acid incorporation
  • Reproducible between batches

Limitations

  • No chaperones (add separately)
  • No post-translational modifications
  • Lower yields than crude extracts
  • Higher cost

When to Use PURE

  • Unnatural amino acid incorporation
  • Studying translation mechanisms
  • "Clean" proteins needed
  • Protease-sensitive targets
  • Linear template expression

Common Artifacts and Solutions

Low Molecular Weight Bands

Causes: Premature termination, proteolysis, internal initiation

Solutions:

  • Optimize rare codon clusters
  • Add protease inhibitors
  • Check for internal AUG codons
  • Use PURE system

Higher MW Bands

Causes: Incomplete termination, read-through, aggregation

Solutions:

  • Ensure strong stop codon (UAA preferred)
  • Check template 3' end
  • Add release factors (RF1/RF2)
  • Reduce protein concentration

No Soluble Protein

Causes: Aggregation during synthesis

Solutions:

  • Lower temperature (25°C → 18°C)
  • Add chaperones
  • Use solubility tag
  • Optimize translation rate

References

CFPS Overview

Extract Preparation

PURE System

Wheat Germ

Codon Optimization

Disulfide Formation

Solubility Tags

Temperature Effects

Repackaged in 1 other repositories

same content, different owner
BioTender-max/awesome-bio-agent-skills open on GitHub →

How to use it

Copy the folder

Take adaptyvbio/cell-free-expression from the repository into ~/.claude/skills for personal use, or into .claude/skills inside a project.

Check the name does not clash

The agent identifies a skill by the name field in its header. Two skills with the same name cannot sit side by side — one of them will be ignored.