Mileage Tracker is answering right now. Last checked 3 min ago. It exposes 14 tools. Last commit 2 Nov 2026.
Log expenses, receipts and mileage from chat: auto-categorise, split VAT, summarise, export, rebill.
Uptime history
41 days of history · worst day 90%
41 days agonow
100.0%
Uptime 24h
76 of 76 checks
14
Tools
read from the server
245 ms
Response time
average over 24h
2
Stars
last commit 2 Nov 2026
What changed 2
Every tool that appeared, vanished or quietly changed what it asks for. Recorded since 15 October 2026. No other catalogue keeps this.
16 Oct
a tool changed version
15 Oct
a tool changed version
Nothing serious here today
Today is the operative word: we check Mileage Tracker every 15 minutes and re-read its code on every release. Watch it and you find out the day that stops being true.
Connect this server
Endpoint below is the one we actually reach during checks — not the one copied from a README. Last verified 3 min ago.
run in your terminal
claude mcp add mileage-tracker --transport http https://mcp.zovo.one/mcp/mileage-trackerSettings → Connectors → Add custom connector, then paste this address
https://mcp.zovo.one/mcp/mileage-tracker~/.codex/config.toml
[mcp_servers.mileage-tracker]
url = "https://mcp.zovo.one/mcp/mileage-tracker".cursor/mcp.json
{
"mcpServers": {
"mileage-tracker": {
"url": "https://mcp.zovo.one/mcp/mileage-tracker"
}
}
}.vscode/mcp.json
{
"servers": {
"mileage-tracker": {
"type": "http",
"url": "https://mcp.zovo.one/mcp/mileage-tracker"
}
}
}Available tools 14
Read directly from the server with tools/list, grouped by what they act on.
If a tool disappears, we record the date.
expense
expense_add
Record one expense and return its id, its net/VAT split and its billable flag. The response states every default that was applied, so the caller can see what was assumed rather than having to guess.
expense_delete
Delete one expense by id and report what went. The receipt FILE stays on disk. Deleting a rebilled expense loses the record of what an invoice charged, so correct it with expense_update instead.
expense_export
Export the expenses in a date range as csv, xlsx or json and return a download link that is valid for one hour. Nothing partial is ever written: if a limit is hit no file is produced at all.
expense_list
List expenses in a date range with each one's net/VAT split, category, merchant, project and billable flag, plus a total per currency. Free reads the last 30 days and says when your range predates it.
expense_mark_rebilled
Mark expenses as rebilled once the invoice that carries them actually exists. Pass the expense_ids of one currency group from expense_to_invoice, or that project, date range and currency. Returns what was marked.
expense_settings
Read or set the defaults expense_add uses when a call does not name them: default_vat_rate and default_currency. Returns the stored defaults. Call with no arguments to read them without changing anything.
expense_summary
Totals for a date range grouped by category, project, month or merchant, per currency with gross, net and VAT, never mixed. Receipts only; bank transactions are totalled by bank-statement's statement_summary.
expense_to_invoice
Preview the unbilled billable expenses of one project as invoice_create line items (description, quantity, unit_price, tax_rate), grouped per currency. Read-only: nothing is marked rebilled here.
expense_update
Change one expense by id; only the fields you pass move. amount is in MAJOR units. A rebilled expense refuses an amount, currency or vat_rate edit unless unlink_rebill drops the invoice link.
license
license_activate
Turn Pro on for this connection with key, an MCPL1.<payload>.<signature> issued at checkout for this server or the bundle. Data under your token stays; a wrong or expired key changes nothing. license_status confirms it.
license_status
Report this endpoint's licence state for your token as JSON: the product, the tier free or pro, why it is not Pro, and the checkout URL. Call it to explain a free-tier refusal. No arguments, nothing changes.
category
category_rules
Replace the merchant-to-category rules, or call with no rules to list them. Returns the stored rule list. The rules are applied by expense_add whenever a call gives no category of its own.
mileage
mileage_add
Record a business trip as an expense, priced as distance x rate. Give exactly one of km or miles. Returns the saved id with the rate used, where that rate came from and the money, in the rate's own currency.
receipt
receipt_attach
Not available on the hosted endpoint: it has no filesystem, so there is no receipt file to read or hash. Attach receipts on a local install instead - download expense-tracker.mcpb from https://github.com/theluckystrike/mcp-servers/releases/latest and open it in Claude Desktop - or record the receipt reference in the expense note.
Endpoints
| URL | Transport | State | Latency | Checked |
|---|---|---|---|---|
| https://mcp.zovo.one/mcp/mileage-tracker | streamable-http | answering | 62 ms | 3 min ago |
Alternatives to Mileage Tracker
same job, measured the same wayExpense Tracker Receipts Mileage
by theluckystrike
Log expenses, receipts and mileage from chat: auto-categorise, split VAT, summarise, export, rebill.
Business Expenses
by theluckystrike
Log expenses, receipts and mileage from chat: auto-categorise, split VAT, summarise, export, rebill.
Expense Tracker
by theluckystrike
Log expenses, receipts and mileage from chat: auto-categorise, split VAT, summarise, export, rebill.
Expenses
by theluckystrike
Log expenses, receipts and mileage from chat: categorise, split VAT, summarise, export.
Expense Report
by theluckystrike
Expense report builder: log expenses, categorise, split VAT, export from chat.
Expenses Tracker
by theluckystrike
Track expenses from your AI chat: log, categorize, monthly CSV reports. All data is local.
Mileage Log
by theluckystrike
Mileage log for deductible driving: trips, effective-dated rates, summaries and CSV export.
Receipt Expense Scanner Reports
by theluckystrike
Log expenses and export clean reports for tax time - your ledger never leaves your machine.
Mileage Tracker — questions
Answers built from our own checks of this server.
What can Mileage Tracker do?
It exposes 14 tools, read directly from the server on our last check. Among them: category_rules, expense_add, expense_delete, expense_export, expense_list, expense_mark_rebilled and 8 more. The full list with descriptions is on this page — we take it from the server itself via tools/list, not from a README.
How MCP servers expose tools in the first place →
What is Mileage Tracker mostly used for?
Its tools cluster around expense and license. That is what this server is built to work with — the grouping comes from the actual tool names, not from a category we assigned.
Is Mileage Tracker working right now?
We send a real MCP handshake every 15 minutes. Over the last 24 hours 76 of 76 checks got a reply (100.0%), average response time 245 ms. The bar chart above shows every period we have measured.
How do I connect Mileage Tracker?
Copy the ready config from this page. We generate it for Claude Code, Claude Desktop, Codex, Cursor and VS Code, each in the form that client actually reads. It is a remote server, so there is nothing to install — the client connects to the address.
Does Mileage Tracker need an API key?
No. Mileage Tracker completed a full MCP handshake with us as an anonymous client and listed its tools without asking for anything. All 14 of them are readable on this page. This is what we observed, not what the docs claim.
How fast is Mileage Tracker?
It answers our handshake in 245 ms on average, which is faster than 58% of all working MCP servers we measure. The comparison comes from our own checks across the whole registry, every 15 minutes.
Is Mileage Tracker open source?
The code is open source: it is published under the MIT licence, written in JavaScript, 2 stars on GitHub and 2 open issues. The licence covers the code in the repository, not the hosted service at mcp.zovo.one, which runs on its operator's own terms.