mcpbeat Sign in

RFQdecoder MCP Server

by mounirt879 Your server? Claim it
answering

RFQdecoder is answering right now. Last checked 7 min ago. It exposes 7 tools.

Should-cost of a machined, sheet metal or cast part from its PDF, DXF or STEP drawing, line by line.

Uptime history 33 days of history · worst day 99%
33 days agonow
100.0%
Uptime 24h
183 of 183 checks
7
Tools
read from the server
660 ms
Response time
average over 24h
OAuth sign-in
Access
streamable-http

What changed 19

Every tool that appeared, vanished or quietly changed what it asks for. Recorded since 7 October 2026. No other catalogue keeps this.

19 Oct a tool description was rewritten verifier_devis
19 Oct a tool changed the parameters it asks for verifier_devis
12 Oct a tool changed the parameters it asks for calculer_taux_horaire
11 Oct a tool changed the parameters it asks for3 times that day calculer_taux_horaire
10 Oct 7 tool descriptions were rewritten8 times that day calculer_taux_horaire, chiffrer_piece, comparer_quantites and 4 more
10 Oct a tool changed the parameters it asks for recharger_credits
7 Oct a tool description was rewritten2 times that day recharger_credits
7 Oct a tool changed the parameters it asks for2 times that day recharger_credits
and 5 more, back to 7 October 2026

RFQdecoder missed 2 checks this week

Everything else answered, so this is steady rather than shaky. We check every 15 minutes, which is how a one-off gets told apart from the start of a pattern, and how you hear about the next one within the hour instead of from your users.

Three servers free · no card

Connect this server

Endpoint below is the one we actually reach during checks — not the one copied from a README. Last verified 7 min ago.

run in your terminal
claude mcp add rfqdecoder --transport http https://rfqdecoder.com/api/mcp
Settings → Connectors → Add custom connector, then paste this address
https://rfqdecoder.com/api/mcp
~/.codex/config.toml
[mcp_servers.rfqdecoder]
url = "https://rfqdecoder.com/api/mcp"
.cursor/mcp.json
{
  "mcpServers": {
    "rfqdecoder": {
      "url": "https://rfqdecoder.com/api/mcp"
    }
  }
}
.vscode/mcp.json
{
  "servers": {
    "rfqdecoder": {
      "type": "http",
      "url": "https://rfqdecoder.com/api/mcp"
    }
  }
}

This endpoint answered with an authorization challenge. The server is running, and it signs you in through your browser: there is no API key to paste.

This server publishes 1 more address. The block above uses the one we reach during checks; the full list is under Endpoints below, and the author may intend a particular one for your client.

Available tools 7

Read directly from the server with tools/list, grouped by what they act on. If a tool disappears, we record the date.

calculer
calculer_taux_horaire
Use this when the user asks for the hourly rate of a machine or workstation (CNC, laser, press, welding cell...). Computes it from the user's values (price, utilisation, labour, energy) for free, or reads a reference rate from the database (1 credit). Do not use for labour-only salary questions.
chiffrer
chiffrer_piece
Use this when the user asks what a manufactured part should cost (should-cost, target price, quote check) and a plan_id is available. Returns the unit price broken down line by line: material, each operation with machine and time, setups, overheads, margin, and what is not included. Requires material and quantity; ask the user if they are missing. Do not use for general price questions without a drawing. 1 credit.
comparer
comparer_quantites
Use this when the user wants to see how the unit price of the same part changes with quantity (2 to 8 quantities, e.g. 50, 500, 5000). Returns one costed line per quantity. Do not use for a single quantity (use chiffrer_piece). 1 credit per quantity.
consulter
consulter_usage
Use this when the user asks how many estimates or credits remain, or what limits apply. Returns remaining credits, quotas and recent calls. Free, read-only.
deposer
deposer_plan
Use this when the user provides a technical drawing of a manufactured part (PDF, DXF or STEP, max 20 MB) that will be costed. Uploads the file (base64) and returns a plan_id plus the dimensions and features read from it. Do not use for photos, invoices or documents that are not part drawings. Free.
recharger
recharger_credits
Use this only when the user asks to buy or top up estimates, or after an estimate failed because credits ran out and the user wants to continue. Returns a secure card payment page (Stripe) to give to the user: pack25 (25 estimates, EUR 15 excl. VAT), pack100 (100, EUR 50), illimite (unlimited, EUR 200 per month). No payment happens inside the conversation; credits are added as soon as payment is confirmed. Free.
verifier
verifier_devis
Use this when the user has a supplier quote for a part and wants to know if the price is fair. Compares the quoted price with the price rebuilt from the drawing, line by line, and lists the questions to ask the supplier. Requires a plan_id and the quoted unit price. 1 credit. The quote can be passed either as its unit price (devis.prix_unitaire_eur) or as the PDF file (devis.pdf_base64); with the PDF, the price, quantity and supplier are read automatically and returned in devis_lu.

Endpoints

URLTransportStateLatencyChecked
https://rfqdecoder.com/api/mcp streamable-http answering 269 ms 7 min ago
https://rfqdecoder.com/api/v1/mcp streamable-http sign-in 734 ms 8 min ago

Alternatives to RFQdecoder

same job, measured the same way
QuotedPart
by helios-one-oy

Price CNC and sheet metal parts from STEP models or PDF drawings at your job shop's own rates.

answering
PDF Extractor: Bulk PDF to Text, Tables & Markdown from a CSV
by nero-engine

Extract text, tables and metadata from every PDF linked in a dataset, CSV or Google Sheet.

answering
Brode.io
by brode

Convert any image into machine embroidery files (DST, PES…) or vector graphics (SVG, PDF, EPS, DXF).

answering
MagicSlides
by theindianappguy

Create presentations, docs, sheets and meeting notes from chat. Hosted link, editor, PPTX & PDF.

answering
Bulk OCR: Image & Scanned PDF to Text from CSV or Google Sheet
by nero-engine

OCR every image and scanned PDF linked in an Apify dataset, CSV, Excel or Google Sheet, keeping...

answering
DingCard
by lottshin

Make posters, social cards and slide decks from templates, check the layout, render PNG, JPG or PDF

504 installs/wk local only
SendFaxFast
by sendfaxfast

Send real faxes from AI chat. PDF, JPG or PNG. Pay per fax via Stripe link. US, CA, AU, NZ + 39

6 tools answering
Vectorize
by dudko

Hosted MCP front door to the Vectorize API: raster-to-vector tracing to SVG, PDF, EPS or DXF.

answering

RFQdecoder — questions

Answers built from our own checks of this server.

What can RFQdecoder do?
It exposes 7 tools, read directly from the server on our last check. Among them: calculer_taux_horaire, chiffrer_piece, comparer_quantites, consulter_usage, deposer_plan, recharger_credits and 1 more. The full list with descriptions is on this page — we take it from the server itself via tools/list, not from a README. How MCP servers expose tools in the first place →
Is RFQdecoder working right now?
We send a real MCP handshake every 15 minutes. Over the last 24 hours 183 of 183 checks got a reply (100.0%), average response time 660 ms. The bar chart above shows every period we have measured.
How do I connect RFQdecoder?
Copy the ready config from this page. We generate it for Claude Code, Claude Desktop, Codex, Cursor and VS Code, each in the form that client actually reads. It is a remote server, so there is nothing to install — the client connects to the address. You sign in through your browser once and the client keeps the session: no key to copy, and it refuses anonymous clients.
How do you sign in to RFQdecoder?
No API key is involved. RFQdecoder answers our knock with an OAuth challenge, so you authorise it once in your browser and the client keeps the session. That is also why we see no tool list: it will not describe itself to an anonymous client, and that is the server working as intended, not a fault.
How fast is RFQdecoder?
It answers our handshake in 660 ms on average, which is faster than 14% of all working MCP servers we measure. That is on the slow side — worth knowing if the tool sits inside an interactive loop. The comparison comes from our own checks across the whole registry, every 15 minutes.