mcpbeat Sign in

MakerPortal compute MCP Server

by makerportal Your server? Claim it
not responding

MakerPortal compute is listed as active in the registry but did not answer our last check. 83 installs a week from npm. It exposes 8 tools.

Deterministic engineering solvers: biquad filter design, room eigenmodes, LLM VRAM fit.

Installs per day peak 19 · avg 8 · -3% w/w
a month agotoday
Uptime history 66 days of history · worst day 0%
66 days agonow
0.0%
Uptime 24h
0 of 91 checks
8
Tools
read from the server
96 ms
Response time
average over 24h
83
Installs / week
npm and PyPI

What changed 8

Every tool that appeared, vanished or quietly changed what it asks for. Recorded since 23 September 2026. No other catalogue keeps this.

18 Oct a tool appeared portLength
9 Oct 4 tool descriptions were rewritten biquadDesign, llmVramFit, roomModes and 1 more
9 Oct 2 tools appeared gaussianBeam, opticsResonator
23 Sep a tool changed the parameters it asks for llmVramFit

MakerPortal compute does not always answer

Over the last week it answered 0.0% of our checks. We check every 15 minutes, so you hear about the next outage within the hour — not from your users.

Three servers free · no card

Connect this server

Endpoint below is the one we actually reach during checks — not the one copied from a README. Last verified 13 min ago.

run in your terminal
claude mcp add compute --transport http https://makerportal.ai/api/mcp
Settings → Connectors → Add custom connector, then paste this address
https://makerportal.ai/api/mcp
~/.codex/config.toml
[mcp_servers.compute]
url = "https://makerportal.ai/api/mcp"
.cursor/mcp.json
{
  "mcpServers": {
    "compute": {
      "url": "https://makerportal.ai/api/mcp"
    }
  }
}
.vscode/mcp.json
{
  "servers": {
    "compute": {
      "type": "http",
      "url": "https://makerportal.ai/api/mcp"
    }
  }
}

Available tools 8

Read directly from the server with tools/list, grouped by what they act on. If a tool disappears, we record the date.

biquaddesign
biquadDesign
Design one RBJ-cookbook biquad and report its numerical behaviour. The identical function behind the /lab/biquad coefficient tables. Returns coefficients at the requested sample rate, coefficients at every other rate whose Nyquist limit clears the corner, pole/zero geometry, the −3 dB points solved by bisection, a Q sweep, a gain sweep where the type uses gain, and the quantised forms. The 240-point response curve is omitted unless include=curve is passed. Non-finite values (a notch is −∞ at f0; a low-pass is −∞ at Nyquist) are encoded as the strings "Infinity", "-Infinity" and "NaN" — JSON has no other honest option, and null would be a different answer. Every result carries provenance.canonicalUrl — the published page for these exact inputs, or the lane hub when they are off the published grid.
gaussianbeam
gaussianBeam
Solve an ideal Gaussian laser beam: Rayleigh range, divergence, radius at a distance, and the waist behind a focusing lens. The identical function behind the worked examples on /lab/gaussian-beam-calculator, built from the same q-propagation the calculator runs. Give a wavelength and a 1/e^2 waist radius to get the Rayleigh range, the far-field half-angle divergence and the depth of focus. Add `distance` (metres from the waist) for the beam radius and phase-front curvature there. Add `focal` (millimetres) to put a thin lens at the waist and get the focused waist radius, its distance behind the lens and its Rayleigh range. Every result carries provenance.canonicalUrl — the published page for these exact inputs, or the lane hub when they are off the published grid.
llmvramfit
llmVramFit
Decide whether one LLM fits one accelerator, at every quantization. The identical function behind the /lab/llm-vram instrument. Returns one row per quantization (FP16 through Q3_K_M) with weight bytes and their basis, headroom, the largest context that fits, and the bandwidth-limited decode ceiling; plus the chosen best-fitting quant, the full-precision row, and a five-state verdict. Model geometry comes from each repo’s own config.json and tensor-shape index; accelerator capacity and bandwidth come from the site’s device table. Every result carries provenance.canonicalUrl — the published page for these exact inputs, or the lane hub when they are off the published grid.
opticsresonator
opticsResonator
Solve a two-mirror laser cavity: g-parameters, stability, and the TEM00 waist and mirror spot sizes. The identical function behind the worked examples on /lab/optics-bench, built from the resonator code the bench runs. Give the mirror spacing `l` (cm), each mirror radius `r1`, `r2` (cm; positive is concave toward the cavity, negative convex, omitted means flat) and the wavelength `w` (nm). Returns g1, g2, their product, the round-trip half-trace and whether the cavity is stable; when it is, `mode` holds the waist radius (um), its distance from mirror 1 (cm) and the spot radius on each mirror (mm). `mode` is null for an unstable cavity or one on the g1*g2 = 0 or 1 boundary. Every result carries provenance.canonicalUrl — the published page for these exact inputs, or the lane hub when they are off the published grid.
portlength
portLength
Solve a vented loudspeaker box for the length of round port to cut, with both end corrections, the smallest workable diameter and the peak port air speed. The identical function behind the worked examples on /lab/port-length-calculator and the calculator itself. Give the net box volume `vol` (litres), the port inside diameter `dia` (cm) and the tuning `fb` (Hz); `temp` (deg C, default 20) sets the speed of sound. Returns the length to cut (cm), the acoustic length and the end correction it contains, the port area, length/diameter, the air volume the port displaces, and the smallest diameter that can reach the tuning. When the port is too narrow, `tooNarrow` is true and `cutLengthCm` is negative: the end corrections alone already exceed the acoustic length the tuning needs. Add `sd` (cone area, cm^2) and `xmax` (peak excursion, mm) together for the peak port air speed. Every result carries provenance.canonicalUrl — the published page for these exact inputs, or the lane hub when they are off the published grid.
roommodes
roomModes
Solve the eigenmodes of a rectangular room. The identical function behind the /lab/room-modes instrument. Dimensions are in feet and are converted at 0.3048 m/ft. Returns every mode below maxFreq, the three axial fundamentals, mode pile-ups (three or more modes within 5 Hz, capped at 200 Hz because dense modes above the Schroeder crossover are desirable rather than a defect), the widest axial gap below 200 Hz, and Schroeder frequencies at RT60 = 0.3 s and 0.6 s. The full mode list is omitted unless include=modes is passed; counts are always present. Every result carries provenance.canonicalUrl — the published page for these exact inputs, or the lane hub when they are off the published grid.
roomshapeband
roomShapeBand
Solve the best rectangular room proportions for a given volume. The identical function that renders /lab/room-shape/{lo}-{hi}. Give a room volume in cubic feet and get the proportions to build: the length and width as multiples of the ceiling height, the exact dimensions at your volume, the widest axial gap they leave, and how far those proportions sit from a full solve at your exact volume. Also returns the band the volume falls in, that band's guarantee across its whole range, and which Bolt constraints are active at the answer. Five bands cover 800-5,000 cubic feet; a volume outside that range is refused rather than served from the nearest band. Every result carries provenance.canonicalUrl — the published page for these exact inputs, or the lane hub when they are off the published grid.
solenoidfield
solenoidField
Solve the on-axis magnetic field of an air-core solenoid. The identical function behind the /lab/solenoid table. Returns the centre field per amp-turn and at the requested turns and current, the on-axis profile out to three half-lengths, the span over which the field holds to within 1% and 5% of its centre value, the field at the coil mouth as a fraction of the centre, how far the infinite-solenoid shortcut mu0*n*I overstates the answer, and the turn count below which the closed form should not be used on this geometry. Dimensions are in millimetres. The field is exactly linear in turns x current, so only that product changes the answer. Every result carries provenance.canonicalUrl — the published page for these exact inputs, or the lane hub when they are off the published grid.

Endpoints

URLTransportStateLatencyChecked
https://makerportal.ai/api/mcp streamable-http answering 96 ms 13 min ago

Alternatives to MakerPortal compute

same job, measured the same way
AW-1 Sovereign Circuit Breaker
by mvikmanners

Deterministic sub-0.2ms AST security circuit breaker and agent containment engine.

5 tools answering
Decker
by gigshow

Deterministic market-state engine for trading agents — state, gate, coordinates, with receipts.

12 tools answering
Siren
by mysiren

Deterministic visual marketing engine. Your agent plans, renders, and posts on-brand campaigns.

67 tools answering
RepoRipple
by adiarora06

Deterministic repository change-impact analysis for engineers and coding agents.

513 installs/wk local only
Maze MCP
by mrfentmen

Generate, solve and render mazes deterministically from a seed - fully local.

120 installs/wk local only
Gamenumerics
by 26048608982lp-ai

Game numerical design & balance auditing MCP server — 17 deterministic tools, zero LLM guessing.

370 installs/wk local only
Euclid-MCP
by meob

Deterministic logical reasoning engine — facts in Euclid IR, solutions with proof trees

201 installs/wk local only
AAJ Marketing Engines
by sarojkjha

Deterministic marketing math for AI agents: LTV:CAC, pipeline coverage, A/B tests, pricing.

5 tools answering

MakerPortal compute — questions

Answers built from our own checks of this server.

What can MakerPortal compute do?
It exposes 8 tools, read directly from the server on our last check. Among them: biquadDesign, gaussianBeam, llmVramFit, opticsResonator, portLength, roomModes and 2 more. The full list with descriptions is on this page — we take it from the server itself via tools/list, not from a README. How MCP servers expose tools in the first place →
Is MakerPortal compute working right now?
We send a real MCP handshake every 15 minutes. Over the last 24 hours 0 of 91 checks got a reply (0.0%), average response time 96 ms. The bar chart above shows every period we have measured.
The registry lists MakerPortal compute as active — why does it not respond?
The official MCP registry stores what the author submitted; it does not verify that the server still runs. We check the endpoint ourselves, and this one does not answer. Catalogues that copy the registry without checking will show it as working.
How do I connect MakerPortal compute?
Copy the ready config from this page. We generate it for Claude Code, Claude Desktop, Codex, Cursor and VS Code, each in the form that client actually reads. It is a remote server, so there is nothing to install — the client connects to the address.
Does MakerPortal compute need an API key?
No. MakerPortal compute completed a full MCP handshake with us as an anonymous client and listed its tools without asking for anything. All 8 of them are readable on this page. This is what we observed, not what the docs claim.
How many people use MakerPortal compute?
The npm package @makerportal/mcp was installed 83 times in the last week. Week over week that is -3%. We show installs rather than GitHub stars on purpose: a star is a bookmark, an install is someone actually running it.