TuneWorks MCP Server

by chrismore Your server? Claim it

not responding

TuneWorks is listed as active in the registry but did not answer our last check. It exposes 100 tools.

Motorsports workspace for vehicles, setups, sessions, logs, maintenance, and race engineering.

The linked repository no longer exists on GitHub — it was deleted or made private.

Uptime history 24 days of history · worst day 0%

24 days agonow

0.0%

Uptime 24h

0 of 91 checks

100

Tools

read from the server

100 ms

Response time

average over 24h

open, no key

Access

streamable-http

What changed 14

Every tool that appeared, vanished or quietly changed what it asks for. Recorded since 20 October 2026. No other catalogue keeps this.

25 Oct 6 tool descriptions were rewritten create_vehicle, get_garage_summary, get_vehicle_context and 3 more

25 Oct 4 tools changed the parameters they ask for create_setup, create_vehicle, list_ecu_files and 1 more

20 Oct 4 tools appeared get_ai_log_tuner_transcript, get_ai_race_engineer_transcript, list_ai_log_tuner_transcripts and 1 more

TuneWorks does not always answer

Over the last week it answered 4.2% of our checks. We check every 15 minutes, so you hear about the next outage within the hour — not from your users.

Connect this server

Endpoint below is the one we actually reach during checks — not the one copied from a README. Last verified 12 min ago.

Claude Code Claude Desktop Codex Cursor VS Code

run in your terminal

claude mcp add tuneworks --transport http https://tuneworks.ai/mcp

Settings → Connectors → Add custom connector, then paste this address

https://tuneworks.ai/mcp

~/.codex/config.toml

[mcp_servers.tuneworks]
url = "https://tuneworks.ai/mcp"

.cursor/mcp.json

{
  "mcpServers": {
    "tuneworks": {
      "url": "https://tuneworks.ai/mcp"
    }
  }
}

.vscode/mcp.json

{
  "servers": {
    "tuneworks": {
      "type": "http",
      "url": "https://tuneworks.ai/mcp"
    }
  }
}

Available tools 100

Read directly from the server with tools/list, grouped by what they act on. If a tool disappears, we record the date.

vehicle

create_vehicle

Adds a vehicle to the connected user’s TuneWorks garage so setup, session, modification, maintenance, and optimization context can be attached. Deletes are not supported.

create_vehicle_make

Add a custom vehicle make to connected user settings.

create_vehicle_modification

Create a structured modification on an editable TuneWorks vehicle.

delete_vehicle_make

Permanently delete a custom vehicle make after explicit confirmation.

delete_vehicle_modification

Permanently delete a vehicle modification and its files. Requires explicit confirmation.

get_vehicle_context

Returns one saved TuneWorks vehicle with modifications, setups, sessions, maintenance, lists, log metadata, optimization readiness, and next actions.

get_vehicle_map_config

Read the saved map-channel configuration for an accessible vehicle.

get_vehicle_modification

Read one structured modification from an accessible TuneWorks vehicle.

list_vehicle_modifications

List bounded structured modifications for an accessible TuneWorks vehicle.

update_vehicle

Edits an existing vehicle in the connected user’s TuneWorks garage. Deletes are not supported.

update_vehicle_make

Rename or rescope a custom vehicle make.

update_vehicle_modification

Update a structured modification on an editable TuneWorks vehicle.

calculate

calculate_brake_bias

Estimate front brake bias from piston area, rotor size, and pad friction. Calculates from measured inputs without authentication and does not read or save account data. This estimates mechanical bias. Tire grip, weight transfer, ABS, and balance bars still matter.

calculate_corner_balance

Calculate cross weight, left/right balance, and front/rear split from four scale pads. Calculates from measured inputs without authentication and does not read or save account data. Measure the car in the same state you drive it: driver, fuel, ballast, and tire pressures matter.

calculate_ethanol_blend

Calculates an ethanol blend for a fresh tank, existing fuel, correction, or ratio without authentication or account-data access. Percentages are 0–100 and all volumes use the selected unit. Source ethanol contents are measured values. Fresh mode requires finalVolume; existing mode requires finalVolume, currentVolume, and currentEthanol; correction mode requires tankCapacity, currentVolume, and currentEthanol; ratio mode requires no volumes.

calculate_fuel_injector_size

Estimate injector size from horsepower, fuel type, injector count, and duty cycle. Calculates from measured inputs without authentication and does not read or save account data. This is a sizing estimate. Confirm with your tuner and fuel pressure data.

calculate_gear_ratio_speed

Check speed, RPM, and shift drop from tire size, final drive, and gear ratio. Calculates from measured inputs without authentication and does not read or save account data. Use measured tire diameter when possible. Tire growth and converter/clutch slip can move real-world numbers.

calculate_lap_time_delta

Compare two laps or sector sets and see the best theoretical lap. Calculates from measured inputs without authentication and does not read or save account data. Use sectors from timing, video, or data logs. Compare similar conditions before blaming setup.

calculate_race_fuel_and_weight

Plan a race fuel load, reserve, start weight, and projected minimum-weight margin. Calculates from measured inputs without authentication and does not read or save account data. Assumes the entered per-lap consumption applies to race, formation, and allowance laps. Finish weight retains only the selected reserve. Confirm your series weighing rules and validate consumption with real data.

calculate_spring_wheel_rate

Convert spring rate and motion ratio into wheel rate for setup comparisons. Calculates from measured inputs without authentication and does not read or save account data. Wheel rate compares spring changes. It does not account for bars, bump stops, tires, or aero load.

calculate_tire_pressure_adjustment

Turn cold, hot, and target hot pressures into the next cold pressure to try. Calculates from measured inputs without authentication and does not read or save account data. This gives a next-test pressure, not a universal ideal. Recheck after the next run.

shop

add_shop_list_category

Atomically add one category to an existing editable shop list without replacing its existing categories or items.

add_shop_list_item

Atomically add one item to an existing editable shop list without replacing existing items. If its category does not exist yet, TuneWorks creates it.

create_shop_list

Creates a TuneWorks shop list, task list, or parts list, optionally including categories and items.

delete_shop_list

Delete a connected user shop list from active use by safely archiving it. Requires explicit user confirmation and does not hard-delete history.

get_shop_list

Read one connected user shop list with its categories and items.

list_shop_list_items

Lists individual items and completion status in one connected user shop list, with optional filtering for open or completed items.

list_shop_lists

Lists reusable shop lists, event prep lists, task lists, and parts lists saved in TuneWorks.

update_shop_list

Edits shop-list metadata or replaces the full categories and items collection.

update_shop_list_item

Atomically check or uncheck one shop-list item, change its quantity, or do both.

Endpoints

URL	Transport	State	Latency	Checked
https://tuneworks.ai/mcp	streamable-http	answering	100 ms	12 min ago

Alternatives to TuneWorks

same job, measured the same way

openstatus

by openstatus

Manage monitors, status pages, incidents and maintenances in your openstatus workspace.

answering

Trimet

by pipeworx-io

TriMet MCP — live arrivals, stop lookup, vehicle positions and service alerts for Portland…

309 installs/wk 48 tools answering

TraceWeave

by gokeshenzhen

Portable MCP runtime for RTL logs and VCD; repository setup adds FSDB and site EDA integration

136 installs/wk local only

Carrierscore

by carrierscore

FMCSA motor-carrier risk scores, monitoring, and carrier-selection evidence reports for AI agents.

8 tools answering

RoastPilot

by syamaner

RoastPilot controls coffee roasting sessions through local stdio MCP tools and exports logs.

275 installs/wk local only

Sport MCP

by sport-mcp

Strength-training log for iPhone: read workouts, records and progress; plan and log training.

answering

Sitegoalie

by sitegoalie

Monitor and maintain client WordPress sites: updates, uptime, PHP errors, performance and reports.

answering

511 Sf Bay

by pipeworx-io

511 SF Bay Transit MCP — live departures, vehicle positions and service alerts for every transit…

126 installs/wk 48 tools answering

TuneWorks — questions

Answers built from our own checks of this server.

What can TuneWorks do?

It exposes 100 tools, read directly from the server on our last check. Among them: add_shop_list_category, add_shop_list_item, analyze_tire_temperatures, archive_maintenance, archive_session, archive_setup and 94 more. The full list with descriptions is on this page — we take it from the server itself via tools/list, not from a README. How MCP servers expose tools in the first place →

What is TuneWorks mostly used for?

Its tools cluster around vehicle, calculate and shop. That is what this server is built to work with — the grouping comes from the actual tool names, not from a category we assigned.

Is TuneWorks working right now?

We send a real MCP handshake every 15 minutes. Over the last 24 hours 0 of 91 checks got a reply (0.0%), average response time 100 ms. The bar chart above shows every period we have measured.

Is TuneWorks still maintained?

The linked repository no longer exists on GitHub — it was deleted or made private. We show this because it changes what you can expect: an unmaintained server may keep answering for months and then stop without warning.

The registry lists TuneWorks as active — why does it not respond?

The official MCP registry stores what the author submitted; it does not verify that the server still runs. We check the endpoint ourselves, and this one does not answer. Catalogues that copy the registry without checking will show it as working.

How do I connect TuneWorks?

Copy the ready config from this page. We generate it for Claude Code, Claude Desktop, Codex, Cursor and VS Code, each in the form that client actually reads. It is a remote server, so there is nothing to install — the client connects to the address.

Does TuneWorks need an API key?

No. TuneWorks completed a full MCP handshake with us as an anonymous client and listed its tools without asking for anything. All 100 of them are readable on this page. This is what we observed, not what the docs claim.