Calculiva Cut Planner MCP Server

by calculiva Your server? Claim it

not responding

Calculiva Cut Planner is listed as active in the registry but did not answer our last check. 71 installs a week from npm. It exposes 4 tools.

Plans flooring, trim and wallpaper orders from computed cut layouts. Free, read-only, no account.

Installs per day peak 289 · avg 9

a month agotoday

Uptime history 28 days of history · worst day 0%

28 days agonow

4.4%

Uptime 24h

4 of 91 checks

Tools

read from the server

296 ms

Response time

average over 24h

Installs / week

npm and PyPI

Calculiva Cut Planner does not always answer

Over the last week it answered 14.2% of our checks. We check every 15 minutes, so you hear about the next outage within the hour — not from your users.

Connect this server

Endpoint below is the one we actually reach during checks — not the one copied from a README. Last verified 11 min ago.

Claude Code Claude Desktop Codex Cursor VS Code

run in your terminal

claude mcp add cut-planner --transport http https://mcp.calculiva.com/mcp

Settings → Connectors → Add custom connector, then paste this address

https://mcp.calculiva.com/mcp

~/.codex/config.toml

[mcp_servers.cut-planner]
url = "https://mcp.calculiva.com/mcp"

.cursor/mcp.json

{
  "mcpServers": {
    "cut-planner": {
      "url": "https://mcp.calculiva.com/mcp"
    }
  }
}

.vscode/mcp.json

{
  "servers": {
    "cut-planner": {
      "type": "http",
      "url": "https://mcp.calculiva.com/mcp"
    }
  }
}

Available tools 4

Read directly from the server with tools/list, grouped by what they act on. If a tool disappears, we record the date.

plan

plan_flooring_order

Plans laminate, vinyl plank (LVP) or engineered plank flooring for 1 to 12 rooms, rectangles or L shapes, with the plank size and planks per carton from the carton: cartons to buy, every cut piece traced to its source plank, offcuts carried from one room to the next, the 8 scenarios (direction x offset 1/3 or 1/2 x reuse, plus aligned joints in the chosen direction when offset 0 is chosen) and the best one when no other ties it (fewest cartons, then least offcut, then fewest planks), and how many planks a flat waste allowance would miss. Up to 3,000 planks per call. Lengths accept feet and inches. Returns a link per room to the full plan on calculiva.com.

plan_trim_order

Plans board and batten, wainscoting or picture frame molding on one wall: spacing, the cut list (miter long and short points for frames) and how many boards of each retail length to buy, with the total length bought and offcut percentage for each stock length; the length to buy is the one that buys the least total length, then the least offcut, then the fewest boards. The cut plan is first-fit decreasing: feasible, not proven optimal. Lengths accept feet and inches. Returns a link to the full plan on calculiva.com.

plan_wallpaper_order

Counts the wallpaper rolls to buy from the walls, doors and windows and the roll label (width, length, pattern repeat, match): drops per roll, every cut placed on its roll, match waste, and the straight / half-drop / random comparison. Lengths accept feet and inches. Returns a link to the full plan on calculiva.com.

build

build_order_sheet

Builds one consolidated order sheet from the flooring, trim and wallpaper plans of the same project (pass the same arguments as plan_flooring_order, plan_trim_order and plan_wallpaper_order): cartons, boards per stock length, rolls, total offcuts, the cut list by material and a CSV. Trim pieces of all walls and all types (battens, rails, chair rail, frames) are packed together on the stock boards, and the sheet compares that with one order per wall, each wall on its own best stock length (total length bought, then offcut, then boards).

Endpoints

URL	Transport	State	Latency	Checked
https://mcp.calculiva.com/mcp	streamable-http	answering	35 ms	11 min ago

Alternatives to Calculiva Cut Planner

same job, measured the same way

Glacier Planner: Free Canadian Retirement Calculator

by marcpineault

Free Canadian retirement projections and one what-if from confirmed inputs. No Glacier account.

1 tools answering

Zoopit

by zoopit

Read-only access to a Zoopit account: orders, routes, fleet and live vehicle positions.

answering

RealityCents — Hawaii Mortgage & VA Loan Calculators

by jaymiller-cmg

Read-only Hawaii mortgage and VA loan calculators from RealityCents.com. No personal data collected.

10 tools answering

KiedyKoncert.pl

by kiedykoncert

Who is playing in your city and when? Upcoming concerts in Poland. Read-only, no account.

4 tools answering

comdirect

by mad4ms

Read-only access to comdirect accounts, transactions, depots, orders and postbox documents.

287 installs/wk local only

Ethos

by ethos

Ethos credibility scores and profiles for wallets and X accounts. Read-only, free, no key.

5 tools answering

Givore

by givore

Search live free giveaway listings in Spanish cities, one city per call. Read-only, no account.

2 tools answering

VPNHub Free VPN MCP

by vpnhub

Find free VPN servers by country and protocol. Read-only access; no account or API key.

answering

Calculiva Cut Planner — questions

Answers built from our own checks of this server.

What can Calculiva Cut Planner do?

It exposes 4 tools, read directly from the server on our last check. Among them: build_order_sheet, plan_flooring_order, plan_trim_order, plan_wallpaper_order. The full list with descriptions is on this page — we take it from the server itself via tools/list, not from a README. How MCP servers expose tools in the first place →

Is Calculiva Cut Planner working right now?

We send a real MCP handshake every 15 minutes. Over the last 24 hours 4 of 91 checks got a reply (4.4%), average response time 296 ms. The bar chart above shows every period we have measured.

The registry lists Calculiva Cut Planner as active — why does it not respond?

The official MCP registry stores what the author submitted; it does not verify that the server still runs. We check the endpoint ourselves, and this one does not answer. Catalogues that copy the registry without checking will show it as working.

How do I connect Calculiva Cut Planner?

Copy the ready config from this page. We generate it for Claude Code, Claude Desktop, Codex, Cursor and VS Code, each in the form that client actually reads. It is a remote server, so there is nothing to install — the client connects to the address.

Does Calculiva Cut Planner need an API key?

No. Calculiva Cut Planner completed a full MCP handshake with us as an anonymous client and listed its tools without asking for anything. All 4 of them are readable on this page. This is what we observed, not what the docs claim.

How fast is Calculiva Cut Planner?

It answers our handshake in 296 ms on average, which is faster than 47% of all working MCP servers we measure. The comparison comes from our own checks across the whole registry, every 15 minutes.

How many people use Calculiva Cut Planner?

The npm package calculiva-mcp was installed 71 times in the last week. We show installs rather than GitHub stars on purpose: a star is a bookmark, an install is someone actually running it.