mcpbeat

ワットク(Wattoku) MCP Server

io.github.yhagiwara-meliorra/wattoku
not responding

ワットク(Wattoku) is listed as active in the registry but did not answer our last check. It exposes 8 tools.

Compare Japan's household fixed costs: electricity, city gas and fiber plans, and simulate bundles.

Uptime history 39 hours of history · worst hour 0%
39 hours agonow
0.0%
Uptime 24h
0 of 91 checks
8
Tools
read from the server
134 ms
Response time
average over 24h
open, no key
Access
streamable-http

Connect this server

Endpoint below is the one we actually reach during checks — not the one copied from a README. Last verified 8 min ago.

run in your terminal
claude mcp add wattoku --transport http https://wattoku.meliorra.co/api/mcp
~/Library/Application Support/Claude/claude_desktop_config.json
{
  "mcpServers": {
    "wattoku": {
      "url": "https://wattoku.meliorra.co/api/mcp"
    }
  }
}
~/.codex/config.toml
[mcp_servers.wattoku]
url = "https://wattoku.meliorra.co/api/mcp"
.cursor/mcp.json
{
  "mcpServers": {
    "wattoku": {
      "url": "https://wattoku.meliorra.co/api/mcp"
    }
  }
}
.vscode/mcp.json
{
  "mcpServers": {
    "wattoku": {
      "url": "https://wattoku.meliorra.co/api/mcp"
    }
  }
}

Available tools 8

Read directly from the server with tools/list, grouped by what they act on. If a tool disappears, we record the date.

compare
compare_hikari_plans
2〜5個の光回線プランを、実質総額・キャッシュバックの受取条件(申請方法・受取月・期限・必須オプション)・違約金・撤去費・工事費残債・セット割まで含めて比較します。額面が大きくても受取条件が悪ければ期待値で逆転することがあります。 ※試算は概算です。キャッシュバックの期待値は当サイトの推定であり、実際の受取率を測定した値ではありません。工事費・提供可否は建物の状況により変わります。最終的な料金・条件は必ず各社公式サイトでご確認ください。
compare_plans
選んだ2〜5プランを、年間試算・解約金・燃料費調整の方式・ポイント還元・セット割まで含めて詳細比較します。plan_idはsearch_plans/simulate_costの結果から指定してください。 ※試算は概算です。燃料費調整額・使用状況・割引適用条件により実際の料金と異なる場合があります。最終的な料金・契約条件は必ず各社公式サイトでご確認ください。本サービスはアフィリエイトプログラムにより電力会社等から報酬を受け取ることがあります。
simulate
simulate_cost
月間使用量kWh、または現在の月額電気代からの逆算で、各プランの年間コストと現契約との差額を試算します。使用量が分かる場合はmonthly_kwh、分からない場合はcurrent_monthly_bill_yen(+bill_month)を指定してください。 ※試算は概算です。燃料費調整額・使用状況・割引適用条件により実際の料金と異なる場合があります。最終的な料金・契約条件は必ず各社公式サイトでご確認ください。本サービスはアフィリエイトプログラムにより電力会社等から報酬を受け取ることがあります。
simulate_hikari_cost
指定した光回線プラン(search_hikari_plans が返す plan_slug)の実質総額を、月ごとの内訳つきで試算します。キャッシュバックは「額面どおり受け取れた場合」「受取条件から推定した期待値」「受け取れなかった場合」の3通りの総額を返します。 ※試算は概算です。キャッシュバックの期待値は当サイトの推定であり、実際の受取率を測定した値ではありません。工事費・提供可否は建物の状況により変わります。最終的な料金・条件は必ず各社公式サイトでご確認ください。
switch
get_switch_link
選んだプランの申込ページへのリンクを発行します。申込手続きはユーザー本人がリンク先の電力会社サイトで行ってください(当サービスは申込の代行は行いません)。 ※試算は概算です。燃料費調整額・使用状況・割引適用条件により実際の料金と異なる場合があります。最終的な料金・契約条件は必ず各社公式サイトでご確認ください。本サービスはアフィリエイトプログラムにより電力会社等から報酬を受け取ることがあります。
switch_hikari_cost
現在の光回線契約の解約費用(違約金・工事費残債・撤去費用)と現在の月額を入力すると、乗り換え先プランの実質総額に乗り換えコストを載せた「乗り換えた場合」と「今の契約を続けた場合」の総額差を返します。乗り換えない方が得な場合はそのまま伝えます。 ※試算は概算です。キャッシュバックの期待値は当サイトの推定であり、実際の受取率を測定した値ではありません。工事費・提供可否は建物の状況により変わります。最終的な料金・条件は必ず各社公式サイトでご確認ください。
hikari
search_hikari_plans
戸建て/マンションの区分・スマホキャリア・回線数から、光回線プランを実質総額(月額+事務手数料+工事費−キャッシュバック額面)の安い順で検索します。キャッシュバックは額面に加えて、申請方法・受取までの待ち期間・申請期限から推定した受取期待値と、受け取れなかった場合の総額も返します。提供エリアの最終確認は各社公式で行ってください。 ※試算は概算です。キャッシュバックの期待値は当サイトの推定であり、実際の受取率を測定した値ではありません。工事費・提供可否は建物の状況により変わります。最終的な料金・条件は必ず各社公式サイトでご確認ください。
plans
search_plans
居住エリア・契約アンペア・世帯人数(または月間使用量kWh)から、家庭向け電気料金プランの候補を年間コスト試算付きで検索します。結果は試算額の安い順です。 ※試算は概算です。燃料費調整額・使用状況・割引適用条件により実際の料金と異なる場合があります。最終的な料金・契約条件は必ず各社公式サイトでご確認ください。本サービスはアフィリエイトプログラムにより電力会社等から報酬を受け取ることがあります。

Endpoints

URLTransportStateLatencyChecked
https://wattoku.meliorra.co/api/mcp streamable-http answering 134 ms 8 min ago

ワットク(Wattoku) — questions

Answers built from our own checks of this server.

What can ワットク(Wattoku) do?
It exposes 8 tools, read directly from the server on our last check. Among them: compare_hikari_plans, compare_plans, get_switch_link, search_hikari_plans, search_plans, simulate_cost and 2 more. The full list with descriptions is on this page — we take it from the server itself via tools/list, not from a README. How MCP servers expose tools in the first place →
What is ワットク(Wattoku) mostly used for?
Its tools cluster around switch, simulate and compare. That is what this server is built to work with — the grouping comes from the actual tool names, not from a category we assigned.
Is ワットク(Wattoku) working right now?
We send a real MCP handshake every 15 minutes. Over the last 24 hours 0 of 91 checks got a reply (0.0%), average response time 134 ms. The bar chart above shows every period we have measured.
The registry lists ワットク(Wattoku) as active — why does it not respond?
The official MCP registry stores what the author submitted; it does not verify that the server still runs. We check the endpoint ourselves, and this one does not answer. Catalogues that copy the registry without checking will show it as working.
How do I connect ワットク(Wattoku)?
Copy the ready config from this page — we generate it for Claude Code, Claude Desktop, Codex, Cursor and VS Code, each with the file path that client actually reads. It is a remote server, so there is nothing to install — the client connects to the address.
Does ワットク(Wattoku) need an API key?
No. ワットク(Wattoku) completed a full MCP handshake with us as an anonymous client and listed its tools without asking for anything. All 8 of them are readable on this page. This is what we observed, not what the docs claim.